OSI Security Devices OMNILOCK OM100 Series User Manual page 78

Programming in Menu Mode
Next, select 1-ADD from the Submaster Codes Menu:
- SUBMASTER CODES MENU -
)
1-ADD 2-REMOVE 3-VERIFY
4-HOLD 5-RESTORE
The following prompt will print:
SUBMASTER ID (###)?
Enter the three digit ID number of the Submaster code you want to add or
press CL if you are finished adding Submaster codes. (Valid Submaster ID
numbers range from 502 through 509.)
When you have entered a valid ID, the following prompt will print:
502: 4 DIGIT PIN?
The first three digits of the prompt represent the Submaster ID number that
you entered above. If you are using 5 or 6 digit PINs, the prompt will
reflect it accordingly. Enter the PIN that you wish to assign for the
Submaster code or press the CL key to abort without changing the
Submaster code.
Once you have entered the PIN, the following prompt will print:
SELECT MENU RIGHTS:
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP
(1-5, 6-ALL, CL-DONE)?
Press the Main Menu option number for each menu you wish to assign
access privileges for this Submaster code. If you are assigning rights to all
menus, press 6. When you have finished specifying menus, press the CL
key. Note: There is no confirmation made for menus that you have selected
until after you have finished your selections.
If you press the CL key before making any selections, no changes will be
made to the specified Submaster code and the new PIN will not be assigned.
68