Next, select the desired level from the Access Level Menu:
-- ACCESS LEVEL MENU ---
)
1-UNLOCK 2-CODE 3-LOCK
4-SHUTDOWN
Unlocked
If you selected 1-UNLOCK, the following prompt will print:
UNLOCK WITH FIRST CODE?
)
1-YES 2-NO
Select 1-YES if you want the System to set Unlock with Code level, where
it will wait for a valid entry code to be entered and then will remain
unlocked
Select 2-NO if you want the System to remain unlocked immediately after
ending the programming session,.
If you selected 1-YES to the above prompt, the following prompt will print:
)
SELECT GROUPS TO ENABLE
(1-4, 5-ALL, CL-DONE)?
Press the number of each code group that you want enabled while at the
Unlock with Code level. If you want to enable all groups, press 5-ALL.
Press CL when you have finished selecting groups. Note: There is no
confirmation made for groups that you have selected until after you have
finished your selections.
If you press the CL key before making any selections, the System will
set access level Unlocked immediately after quitting the programming
session. Otherwise, for each of the selected groups that contain a
Supervisor code, the following prompt will print in succession:
)
GROUP # n SUPERVISED?
1-YES 2-NO
Select 1-YES if you want the security level of the code group indicated by n
to be set to supervised. Otherwise, select 2-NO.
Programming in Menu Mode
77