Verifying Holidays - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode
Enter the day of the month of the holiday to remove. You must enter any
leading 0 in the day. Once you have entered a valid day, a prompt similar to
the following will print:
REMOVE HOLIDAY 05/29?
1-YES 2-NO
Select 1-YES to remove the specified holiday from the Holiday List.
Select 2-NO to abort without changing the Holiday List.
When you have made your selection, a confirmation of any changes made
will print and the month prompt will then reprint.

Verifying Holidays

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 4-SCHEDULE
To verify holidays (print a copy of the Holiday List), select 4-SCHEDULE
from the Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 6-HOLIDAY from the Schedule Menu:
---- SCHEDULE MENU -----
)
1-ADD 2-REMOVE 3-VERIFY
4-COPY 5-CLR 6-HOLIDAY
Then, select 3-VERIFY from the Holiday Menu:
)
----- HOLIDAY MENU -----
1-ADD 2-REMOVE 3-VERIFY
4-CLEAR HOLIDAY LIST
92