OSI Security Devices OMNILOCK OM100 Series User Manual page 91

ADD ddd TIME (24 HR)?
Enter the time (in 24 hour format) of the event you wish to add to the daily
schedule for ddd (where ddd represents the schedule that you selected
above), or press the CL key if you are finished adding events to the Time
Schedule.
If you pressed CL in response to the above prompt, the Schedule number
prompt will reprint. Otherwise, when you have entered a valid time, the
following prompt will print:
1-UNLOCK 2-CODE 3-LOCK
ACCESS LEVEL?
Select the access level that you want the System to set at the specified day
and time.
UNLOCKED
If you selected 1-UNLOCK in response to the access level prompt, the
following prompt will print:
UNLOCK WITH FIRST CODE?
1-YES 2-NO
Select 1-YES if you want the System to set Unlock with Code level, where
it will wait for a valid entry code to be entered and then will remain
unlocked.
Select 2-NO to have the System unlock immediately at the specified time.
If you selected 1-YES to the above prompt, the following prompt will print:
SELECT GROUPS TO ENABLE
(1-4, 5-ALL, CL-DONE)?
Press the number of each code group that you want enabled while at the
Unlock with Code level. If you want to enable all groups, press 5-ALL.
Press CL when you have finished selecting groups. Note: There is no
Programming in Menu Mode
81