Printing An Audit Log - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode
To Correct an Error
While entering data, briefly press the CL key to clear erroneous numbers
entered BEFORE the System has accepted the data.
To Correct an Error After Entry
Return to the previous menu and re-enter the data.
Reprinting a Menu
To return to the previous menu or prompt, press the CL key as the first key
whenever data is requested.

Printing an Audit Log

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 1-AUDIT
Note: The Audit Code may also be used to print the Audit Log without
entering programming mode.
To output the Audit Log to the printer, while in Menu mode, press 1-
AUDIT from the Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
The printer will print up to eight lines at a time and then pause. At this time
enter 1-MORE to continue, 2-REPRINT to reprint the previous eight lines,
or CL-DONE to end the printout.
34