Codes - OSI Security Devices OMNILOCK OM100 Series User Manual

Access Levels and Codes

Codes

The Lock provides seven types of codes. These include:
Master for an administrator.
Submaster for up to eight administrator assistants
Manager for Users requiring access level control and limited group
access control.
Supervisor for Users requiring group access control.
General User for anyone who requires normal day-to-day access.
Service for someone who requires access for a limited period of
time.
Audit for printing the Audit Log (non-access code)
All codes consist of a three digit code ID number and a PIN (personal
identification number). The ID number uniquely identifies the code and is
used to reference the code while programming. Further, any time a code is
used, it's ID number is recorded along with the date, time and action taken
in the System's audit log.
The following Table lists valid ID numbers and their associated code types.
ID Number
001 - ###*
501
502 - 509
510
511
* 100 on OM100, 300 on OM300 or 500 on OM500
The PIN length is determined by the length of the Master code and may be
4, 5 or 6 digits long (only one PIN length can be in use at a time).
4
Code Type
General User, Supervisor or Manager
Master
Submaster
Service
Audit