Schedule; Adding A Schedule Event - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode

Schedule

Adding a Schedule Event

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 4-SCHEDULE
Important!
Changes made to the Time Schedule will not
take effect until after you have ended the
programming session at which time, the System
will override the current access level with the
appropriate level as determined by the
schedule.
To add an event to the Time Schedule, select 4-SCHEDULE from the Main
Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 1-ADD from the Schedule Menu:
---- SCHEDULE MENU -----
)
1-ADD 2-REMOVE 3-VERIFY
4-COPY 5-CLR 6-HOLIDAY
The following prompt will print:
SCHEDULE (MON-1..DAY-9)?
Select the daily schedule number that you want to add, or press the CL key
if you are finished adding events to the Time Schedule. The following
prompt will print:
80