Setting The Open Delay Time - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode
The following prompt will print:
MONTH (mm)?
Enter the current month. You must enter any leading zero. When you have
entered a valid month, the following prompt will print:
DAY (dd)?
Enter the current day of the month. You must enter any leading zero.
When you have entered a valid day, the following prompt will print:
YEAR (yy)?
Enter the last 2 digits of the current year. You must enter any leading zero.
When you have entered a valid year, the following prompt will print:
DAY (MON-1..SUN-7)?
Enter the current day of the week. When you have entered a valid day of the
week, confirmation of the new date will print and then, the following prompt
will print:
TIME (24 HR)?
Enter the current time in 24 hour format (military time) or press the CL key
to abort without changing the System time. You must enter any leading
zeros. When you have entered a valid time, confirmation of the new time
will print and the Setup Menu will be reprinted

Setting the Open Delay Time

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 5-SETUP
96