To indicate the results of the command, the lights will flash as
follows:
Green-Green
Red
Assigning Manager Privileges
Programming Code Required:
Master Code or
Submaster Code with menu privilege 2 (codes)
A user with Manager privileges can change or set any access level of the
lock except Shutdown. In addition the Manager may enable or disable
specific groups.
To assign Manager privileges to a general user, enter the following
command sequence while in the Command mode:
To indicate the results of the command, the lights will flash as follows:
Green-Green-Green
Red
Programming in Command Mode
Supervisor privileges assigned
Invalid ID number
89 + ID + CL
Manager privileges assigned
Invalid ID number
25