Removing Holidays - OSI Security Devices OMNILOCK OM100 Series User Manual

When you have made your selection, a confirmation of the changes made to
the Holiday List will print and the month prompt will then reprint.

Removing Holidays

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 4-SCHEDULE
To remove a holiday from the Holiday List, select 4-SCHEDULE from the
Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 6-HOLIDAY from the Schedule Menu:
---- SCHEDULE MENU -----
)
1-ADD 2-REMOVE 3-VERIFY
4-COPY 5-CLR 6-HOLIDAY
Then, select 2-REMOVE from the Holiday Menu:
)
----- HOLIDAY MENU -----
1-ADD 2-REMOVE 3-VERIFY
4-CLEAR HOLIDAY LIST
The following prompt will print:
MONTH (mm)?
Enter the month of the holiday you want to remove, or press the CL key if
you are finished removing holidays from the Holiday List. You must enter
any leading 0 in the month. Once you have entered a valid month, the
following prompt will print:
DAY (dd)?
Programming in Menu Mode
91