OSI Security Devices OMNILOCK OM100 Series User Manual page 29

line at a time and indicate the result of the command via the red and/or
green lights. The WP4000 wireless printer is not required for programming
in the Command mode, however, it may be used to see a printout of the
results of the program entry if desired. There are a limited number of
functions available from the Command mode; they are:
1. Add, Hold or Restore individual codes to the Lock
2. Set the Access level
3. Enable Group access
4. Disable Group access
5. Set the Service code life time
6. Enter Menu mode
7. End programming session
Refer to the Quick Reference Programming Guide located inside the back
cover for a summary of the commands and results available while in the
Command Mode.
These functions and all others (with the exception of entering the Menu
Mode) are also available while in the Menu mode. Menu Mode requires the
use of the WP4000 wireless printer which displays the various menus and
prompts transmitted to it via infrared light from the System. The System
User Capacity and Firmware Version are printed as part of the header
information when entering the Menu Mode.
Programming Overview
19