OSI Security Devices OMNILOCK OM100 Series User Manual page 52

Programming in Menu Mode
Select 1-YES if you want to print the group membership for the User ID
codes, otherwise select 2-NO. Once you have made your selection, the
following prompt will print:
STARTING ID (###)?
Enter the three digit code ID at which you want to begin the User Verify
Report (you must enter any leading zeros) or press the CL key if you are
finished verifying User codes. When you have entered a valid starting ID
number, the following prompt will print:
ENDING ID (###)?
Enter the last three digit code ID that you want to verify or, if you are only
verifying a single User code, press the CL key and the Lock will accept the
starting ID number that you entered above as the ending ID number. When
you have entered a valid ending ID number, the System will print the
requested Verify User Report.
The printer will print up to eight lines at a time and then pause. At this time
enter 1-MORE to continue, 2-REPRINT to reprint the previous eight lines,
or CL-DONE to end the printout.
-- VERIFY USER REPORT --
1-MORE 2-REPRINT CL-DONE
001-1234
002-2345
003-5678
------------------------
Sample Verify User Report With PINs and Groups
-- VERIFY USER REPORT --
1-MORE 2-REPRINT CL-DONE
001-1234
003-1234
005-5678s 006-6789
------------------------
Sample Verify User Report With PINs and No Groups
42
GRP: 1,3,4
GRP: 1
GRP: 1,3,4
002-2345
004-4567