Restoring The Submaster Codes - OSI Security Devices OMNILOCK OM100 Series User Manual

Programming in Menu Mode
Next, select 4-HOLD from the User Codes Menu:
) --SUBMASTER CODES MENU -
-
1-ADD 2-REMOVE 3-VERIFY
4-HOLD 5-RESTORE
The following prompt will print:
SUBMASTER ID (###)?
Enter the three digit ID number of the Submaster code that you want to
place on hold or press the CL key if you are finished placing Submaster
codes on Hold.
When you have entered a valid Submaster ID number, confirmation of the
change will print and the above prompt will reprint.

Restoring the Submaster Codes

Programming Code Required:
Master Code
To Restore Submaster codes from Hold status to active status, select 2-
CODES from the Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 4-SUBMASTERS from the Codes Menu:
) ------ CODES MENU -----
1-USER 2-SERVICE 3-AUDIT
4-SUBMASTERS 5-MASTER
72