OSI Security Devices OMNILOCK OM100 Series User Manual page 121

Step 7 Remove and replace each of the old Batteries, one at a time, with the
plus (+) end down (Figure 7)
Step 8 Close the Battery Cover and press the Gasket in place.
Step 9 Remount the System in the reverse order of Steps 1 through 5 and
you are done!
Collar
Faceplate
Cylinder
Retaining
Screw
Figure 6 OMNILOCK SystemWith Mortise Locksets
AA Alkaline
Battery (4)
Positive
Down
Figure 7 Battery Replacement
Wrench
Torx T15
Wavy
washer
Screw (2)
Cylinder
Washer (2)
Batteries
Lock
Connector
Module
Connector
Module
Battery
Cover
111