Removing The Service Code - OSI Security Devices OMNILOCK OM100 Series User Manual

Next, select 1-ADD from the Service Code Menu:
-- SERVICE CODE MENU ---
)
1-ADD 2-REMOVE 3-VERIFY
4-HOLD 5-RESTORE
6-TIME LIMIT (01:00)
The following prompt will print:
510: 4 DIGIT PIN?
If you are using 5 or 6 digit PINs, the prompt will reflect it accordingly.
Enter the PIN that you wish to assign for the Service code or press the CL
key to abort without changing the Service code.
Once you have entered the PIN, a confirmation of the change will print and
the Service Code Menu will then reprint.

Removing the Service Code

Programming Code Required:
Master Code, or
Submaster Code with menu privilege 2-CODES
To remove the Service code from the System, select 2-CODES from the
Main Menu:
------ MAIN MENU ------
)
1-AUDIT 2-CODES 3-ACCESS
4-SCHEDULE 5-SETUP 0-END
Next, select 2-SERVICE from the Codes Menu:
) ------ CODES MENU -----
1-USER 2-SERVICE 3-AUDIT
4-SUBMASTERS 5-MASTER
Programming in Menu Mode
53