Table of Contents
Advertisement
Chapter 33: Address Table Commands
33
mac-address-table
aging-time
A
T
DDRESS
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or
setting the aging time.
Table 33-1: Address Table Commands
Command
Function
mac-address-table
Sets the aging time of the address table
aging-time
mac-address-table
Sets the hash lookup depth of address table
hash-lookup-depth
mac-address-table
Maps a static address to a port in a VLAN
static
mac-address-table
Enables MAC address learning on the selected
mac-learning vlan
VLAN
clear
Removes any learned entries from the
mac-address-table
forwarding database
dynamic
show
Displays entries in the bridge-forwarding
mac-address-table
database
show
Shows the aging time for the address table
mac-address-table
aging-time
show
Shows the number of MAC addresses used and
mac-address-table
the number of available MAC addresses
count
show mac-address-
Shows the hash lookup depth of address table
table hash-lookup-
depth
show mac-address-
Shows if MAC address learning has been
table mac-learning
enabled on the specified VLAN
config
This command sets the aging time for entries in the address table. Use the
no form to restore the default aging time.
S
YNTAX
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-844 seconds; 0 to disable aging)
D
S
EFAULT
ETTING
300 seconds
C
M
OMMAND
ODE
Global Configuration
– 1013 –
C
ABLE
OMMANDS
Mode
GC
GC
GC
GC
PE
PE
PE
PE
PE
PE
Advertisement
Table of Contents
