Filtering Pseudo Event Traps - Brocade Communications Systems Brocade 8/12c User Manual

30
Pseudo events
4. Enter a description in the Message field. This description is displayed in the event log for this
5. Select a severity from Severity list. You must assign a severity to the pseudo event.
6. Click Next.

Filtering pseudo event traps

The Events pane contains a Selected Down Trap list and a Selected Up Trap list. The Selected Down
Trap list defines the traps for the down state of a product or an interface. The Selected Up Trap list
defines the traps for the up state of the product or an interface.
NOTE
By default in a SAN+IP configuration, all traps known to the Management application are included
in the Available Traps list, under the folders for the MIB to which they belong.
1. Select Monitor > Event Processing > Pseudo Events.
2. Click Add.
3. Click Next to navigate to the Events pane.
884
Refer to "Creating an event action with a pseudo event on the flapping policy"
complete instructions.
pseudo event.The event log displays the exact text you enter in this field; therefore, this
message should describe the events in the event action policy.
The Events pane of the Add Pseudo Event dialog box, shown in
The Pseudo Events dialog box displays.
The Events pane of the Add Pseudo Event dialog box is shown in
FIGURE 396
Events pane of the Add Pseudo Event dialog box
on page 890 for
Figure 396, displays.
Figure 396.
Brocade Network Advisor SAN User Manual
53-1002167-01