Pseudo Events; Displaying Pseudo Event Definitions; Creating Pseudo Event Definitions - Brocade Communications Systems Brocade 8/12c User Manual

30

Pseudo events

Pseudo events
A pseudo event is a combination of different SNMP traps that you decide would constitute a single
event. For example, there are two separate SNMP traps for link up and link down occurrences. You
might decide that these two occurrences should be just one event.

Displaying pseudo event definitions

Perform the following steps to display the properties of a pseudo event.
1. Select Monitor > Event Processing > Pseudo Events.
2. To view additional information for a definition, select a definition from the list. Additional

Creating pseudo event definitions

Perform the following steps to create a pseudo event.
1. Select Monitor > Event Processing > Pseudo Events.
2. Click Add.
3. The Identification pane of the Add Pseudo Event dialog box displays.
4. Type a unique name for the pseudo event. Duplicate names are not allowed.
5. Select the check box to enable the pseudo event or clear the check box to disable the pseudo
6. Click Next.
882
The Pseudo Events dialog box, shown in
FIGURE 394
Pseudo Events dialog box
information displays in the Details of Selected Pseudo Event list at the bottom of the dialog
box.
The Pseudo Events dialog box displays.
event.
The Policy pane of the Add Pseudo Event dialog box, shown in
Figure 394, displays.
Figure
Brocade Network Advisor SAN User Manual
395, displays.
53-1002167-01