Dot1X Reauthentication; Dot1X System-Auth-Control - Dell Networking 7048 Reference Manual

dot1x reauthentication

Use the dot1x reauthentication command in Interface Configuration mode
to enable periodic re-authentication of the client. To return to the default
setting, use the no form of this command.
Syntax
dot1x reauthentication
no dot1x reauthentication
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables periodic re-authentication of the client.
console(config)# interface gigabitethernet 1/0/16
console(config-if-1/0/16)# dot1x reauthentication

dot1x system-auth-control

Use the dot1x system-auth-control command in Global Configuration mode
to enable 802.1x globally. To disable 802.1x globally, use the no form of this
command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
867
802.1x Commands