Aaa Authorization Config-Commands - Dell Force10 S4810P Reference Manual

name
default
local
tacacs+
none
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0

aaa authorization config-commands

Set parameters that restrict (or permit) a user's access to EXEC level commands.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the no aaa
authorization config-commands command.
Defaults Enabled when you configure aaa authorization commands command.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Usage By default, the aaa authorization commands command configures the system to
Information
check both EXEC level and CONFIGURATION level commands. Use the command no aaa
authorization config-commands to enable only EXEC-level command checking.
1408
Define a name for the list of authorization methods.
Define the default list of authorization methods.
Use the authorization parameters on the system to perform
authorization.
Use the TACACS+ protocol to perform authorization.
Enter the keyword none to apply no authorization.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Added support for RADIUS.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the E-Series.