Show Crypto - Dell Force10 S4810P Reference Manual

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage This command enables the SSH server and begins listening on a port. If a port is not specified,
Information listening is on SSH default port 22.
Example
FTOS# conf
FTOS(conf)# ip ssh server port 45
FTOS(conf)# ip ssh server enable
FTOS#
Related show ip ssh
Commands

show crypto

Display the public part of the SSH host-keys.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show crypto key mypubkey {rsa | rsa1}
Parameters
Key
mypubkey
rsa
rsa1
Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage This command is useful if the remote SSH client implements Strict Host Key Checking. You can
Information copy the host key to your list of known hosts.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– displays the ssh information.
NOTE: Some of the parameters in this command require licensing to access. For more
information, contact your Dell Force10 representative.
Enter the keyword key to display the host public key.
Enter the keyword mypubkey to display the host public key.
Enter the keyword rsa to display the host SSHv2 RSA public key.
Enter the keyword rsa1 to display the host SSHv1 RSA public key.
NOTE: If you enable FIPS mode, this parameter is not available.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1451