Redistribute - Dell Force10 S4810P Reference Manual

pre-Version
6.2.1.1
Usage Although the passive interface is neither send nor receive routing updates, the network on that
Information interface still includes in RIP updates sent using other interfaces.
Related
neighbor
Commands
network

redistribute

Redistribute information from other routing instances.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
connected
static
Defaults Not configured.
Command Modes ROUTER RIP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Usage To redistribute the default route (0.0.0.0/0), configure the default-information
Information
originate command.
Related
default-information originate
Commands
1368
Introduced on the E-Series.
– enables RIP for a specified network.
– defines a neighbor.
Enter the keyword connected to specify that information from
active routes on interfaces is redistributed.
Enter the keyword static to specify that information from static
routes is redistributed.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– generates a default route for RIP traffic.