Ip Poison-Reverse - Dell Force10 S4810P Reference Manual

connected
isis
ospf
static
Defaults Not configured.
Command Modes ROUTER RIP
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Related ip prefix-list
Commands

ip poison-reverse

Set the prefix of the RIP routing updates to the RIP infinity value.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip poison-reverse
To disable poison reverse, use the no ip poison-reverse command.
1360
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
(OPTIONAL) Enter the keyword connected to filter only directly
connected routes.
(OPTIONAL) Enter the keyword isis to filter only IS-IS routes.
NOTE: This option is only available on E-Series.
(OPTIONAL) Enter the keyword ospf to filter all OSPF routes.
(OPTIONAL) Enter the keyword static to filter manually configured
routes.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– enters PREFIX-LIST mode and configures a prefix list.