Clear Ssm-Nvram Santap Module - Cisco MDS 9124 - Fabric Switch Reference

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear ssm-nvram santap module

To clear the SANTap configuration for a specific slot stored on the supervisor flash, use the clear
ssm-nvram santap module command in the configuration mode.
Syntax Description slot
Defaults
None.
Command Modes
EXEC mode.
Command History Release
3.2(1)
Usage Guidelines
None.
Examples
The following example shows how to clear the SANTap configuration for a slot 2.
switch# clear ssm-nvram santap module 2
Related Commandss Command
ssm enable feature
OL-16217-01, Cisco MDS SAN-OS Release 3.x
clear ssm-nvram santap module slot
Displays SANTap configuration for a module in the specified slot.
Modification
This command was introduced.
Description
Enables the SANTap feature on the SSM.
clear ssm-nvram santap module
Cisco MDS 9000 Family Command Reference
4-81