Verifying An Mqc Object; Attaching And Detaching A Qos Policy Action - Cisco Nexus 7000 Series Configuration Manual

Using Modular QoS CLI
Step 3
Step 4
Step 5

Verifying an MQC Object

To display MQC object configuration information, perform one of the following tasks:
Command
show class-map [type qos] [class-map-name |
conform-color-in | conform-color-out |
exceed-color-in | exceed-color-out]
show class-map type queuing [class-queuing-name]
show table-map [table-map-name |
cir-markdown-map | pir-markdown-map]
show policy-map [type qos] [policy-map-name |
qos-dynamic]
show policy-map type queuing [policy-map-name |
qos-dynamic]
For detailed information about the fields in the output from these commands, see the Cisco Nexus 7000 Series
NX-OS Quality of Service Command Reference.

Attaching and Detaching a QoS Policy Action

The software does not allow you to enable or disable QoS features with a configuration command. To enable
or disable QoS features, you must attach or detach QoS policies to or from interfaces, VLANs, or tunnels as
described in this section.
Command or Action
switch(config-cmap)# description string
switch(config-cmap)# exit
(Optional) switch(config)# copy
running-config startup-config
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
Purpose
Adds a description string to the MQC object.
The description can be up to 200 alphanumeric
characters.
Note You cannot modify the description
of system-defined queuing class
maps.
Exits table-map mode and enters global
configuration mode.
Saves the running configuration to the startup
configuration.
Purpose
Displays information about all configured class maps
or a selected class map of type qos.
Displays information about all configured class maps
or a selected class map of type queuing. Class queuing
names are listed in Table 6: System-Defined Type
queuing Class Maps, on page
Displays information about all configured table maps
or a selected table map.
Displays information about all configured policy maps
or a selected policy map of type qos.
Displays information about all configured policy maps
or a selected policy map of type queuing.
Verifying an MQC Object
15.
23