Changing Horizontal And Vertical Offset Of Roof Fascia; Roof Soffits - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

Changing Horizontal and Vertical Offset of Roof Fascia

You can change the horizontal or vertical offset of a fascia either through its properties or by graphically
moving the fascia. To change the offset through properties, see
Changing Horizontal Offset of Roof Fascia
To move a single fascia
To move multi-segmented fascia
1 Place the cursor over the fascia and press Tab to highlight the shape handle. The status bar
2 Click to select the shape handle.
3 Move the cursor left or right to change the horizontal offset.
Changing Vertical Offset of Roof Fascia

Roof Soffits

Use the Roof Soffit tool to create roof soffits.
694 | Chapter 13 Architectural Design
Select the fascia and drag it horizontally.
Moving fascia on the left also moves fascia on the right
indicates when you are highlighting the shape handle.
This affects the horizontal offset of all segments of the fascia, so the segments are symmetrical.
Select the fascia and drag it up or down. If the fascia is multi-segmented, then all segments move
up or down the same distance.
Fascia moving vertically in section
Roof Properties on page 703.