Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual page 270

Right-click on the wheel and click Close Wheel.
Press F8.
NOTE For the following procedures, you can also click
To change the size of the wheels
1 Display a wheel.
2 Right-click on the wheel, and click Options.
3 In the Options dialog, click the SteeringWheels tab, under Big Wheel Appearance/Mini Wheel
Appearance, for Size, select Small, Normal, or Large.
4 Click OK.
To change the opacity of the wheels
1 Display a wheel.
2 Right-click on the wheel, and click Options.
3 In the Options dialog, click the SteeringWheels tab, under Big Wheel Appearance/Mini Wheel
Appearance, select the level of transparency.
Select 90% to display SteeringWheels at the greatest opacity. The default setting is 50%.
4 Click OK.
To enable tooltips for wheels
1 Display a wheel.
2 Right-click on the wheel, and click Options.
3 In the Options dialog, on the SteeringWheels tab, click Show tooltips.
Tooltips are displayed for each wedge and buttons on a wheel when the cursor hovers over the wheel.
4 Click OK.
To enable cursor text for wheels
1 Display a wheel.
2 Right-click on the wheel, and click Options.
3 In the Options dialog, on the SteeringWheels tab, click Show tool cursor text.
Text labels are displayed while selected tools are being used.
4 Click OK.
To enable messages for wheels
1 Display a wheel.
2 Right-click on the wheel, and click Options.
3 In the Options dialog, on the SteeringWheels tab, click Show tool messages.
Messages are displayed when you use the navigation tools.
228 | Chapter 5 Project Views
Options to access the Options dialog.