Railings; Adding A Railing - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

Name
Identity Data
Comments
Mark
Phasing
Phase Created
Phase Demolished

Railings

You can add railings as free-standing components to levels, or attach them to hosts (such as floors, ramps,
or stairs).
When you sketch a railing, rails and balusters are automatically placed on the railing at evenly spaced
intervals. For information on editing baluster and post placement, see
and Posts on page 749.
The shape of rails and balusters are determined by profile families loaded in the project. See
on page 754.

Adding a Railing

1 Click Home tab
2 If you are not in a view where you can sketch a railing, you are prompted to pick a view. Select
3 To set the host for the railing, click Create Railing Path tab
4 Click on the host to select it.
746 | Chapter 13 Architectural Design
Description
Specific comments about the ramp.
A unique identifier for the ramp.
The phase when the ramp was created. See
The phase when the ramp was demolished. See
Circulation panel
a view from the list, and click Open View.
and place the cursor near the host (for example, a floor or staircase).
As you move the cursor, the appropriate hosts highlight.
NOTE To select a level, just click in the drawing area to start drawing the railing.
Creating Phases
Demolishing Elements
Controlling Placement of Balusters
Railing.
Tools panel
on page 1332.
on page 1338.
Railing Properties
Set Railing Host,