Creating Spiral Staircases - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

2 Click Home tab
3 Click Home tab
4 Click Create Stairs Sketch tab
5 Move the cursor to set the angle for the stair footprint.
6 To create a straight run of stairs, click outside the rectangle on the end away from the start point.
7 To create a jogged set of stairs, click for the end of the first run, move the cursor, and click the
8 Edit the footprint, if desired.
9 To change the properties of the stairs, click Create Stairs Sketch tab
10 Click Finish Stairs.

Creating Spiral Staircases

1 Open a plan or 3D view.
2 Click Home tab
3 Click Home tab
4 Click Create Stairs Sketch tab
5 In the drawing area, click to select a center point for the spiral.
6 Click a start point.
7 Click an end point to complete the spiral.
732 | Chapter 13 Architectural Design
Circulation panel
Work Plane panel
Work Planes on page 317.
to start the stairs.
start and end points for the second run.
Continue this process if there is more than one jog.
Properties. Edit the instance parameters, and click Edit Type to edit type parameters.
For a description of stair properties and their values, see
Revit Architecture generates a staircase with automatic railings.
Completed stairs in 3D with default railings and balusters
Circulation panel
Work Plane panel
Work Planes on page 317.
Stairs.
Set to select a different work plane. See
Draw panel Run. Click in the drawing area where you want
Stair Properties
Stairs.
Set, to select a different work plane. See
Draw panel (Center-ends Arc).
Sketching and
Element panel Stairs
on page 738.
Sketching and