Adding Structural Columns Inside Architectural Columns - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

Because of the unique orientation properties of slanted column ends, locking to grids requires situational
guidelines.
If both ends are locked to a grid and the grids at each end are not a subset of each other, the Column
Style parameter (see
to Slanted - End Point Driven.
Movement of a grid to which an angle-driven column is locked will move the entire column.
Movement of a grid to which an endpoint-driven column is locked will move only that end of the
column. The column will lengthen or shorten to meet the new location of the grid.

Adding Structural Columns Inside Architectural Columns

1 Click Home tab
2 Click Place Structural Column tab
3 Click Place Structural Column tab
4 Either select individual architectural columns or drag a pick box over architectural columns in
Structural Column Instance Properties
Build panel
Selector drop-down.
the view to select multiple columns.
Selecting a single architectural column
Selecting multiple architectural
columns
on page 836) of the columns will be changed
Column drop-down
Element panel, and select a column type from the Type
Multiple panel
Adding Structural Columns Inside Architectural Columns | 829
Structural Column.
At Columns.