Toposurface And Subregion Properties - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

To grade a toposurface
1 Click Massing & Site tab
2 In the Edit Graded Region dialog, select one of the following:
3 Select the toposurface.
4 When you are finished editing the surface, click Finish Surface.
If you drag the new graded region, notice that the original remains. Select the original, right-click, and click
Element Properties. Notice that the Phase Demolished property has the value of the current phase.
Related topics
Reporting Cut and Fill Volumes on a Site
Toposurface Subregions

Toposurface and Subregion Properties

Toposurface and Subregion Properties
Name
Materials and Finishes
Material
Dimensions
Projected Area
Surface Area
Identity Data
Comments
Name
Create a new toposurface exactly like the existing one.
Create a new toposurface based on the perimeter points only.
If you are editing the surface, Revit Architecture enters sketch mode. You can add or delete
points, change the elevation of points, or simplify the surface.
on page 958
Description
Select the surface material from the list. You can create your own toposurface ma-
terial. Topographical surfaces do not support materials with surface patterns. See
Materials
The projected area is the area that the surface covers when you look down on it.
This is a read-only value.
Displays the total surface area. This is a read-only value.
User-defined comments about the toposurface, which can display in schedules.
The name of the toposurface, which can display in schedules.
Modify Site panel Graded Region.
on page 964
on page 961
on page 468.
Toposurface and Subregion Properties | 961