Juniper JUNOS OS 10.3 - SOFTWARE Manual page 969

Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
—(TX Matrix Plus routers only) (Optional) Show buffer statistics for the TX Matrix
sfc
Plus router (or switch-fabric chassis). Replace
By default, when you issue the
Matrix Plus master Routing Engine, the command is broadcast to all the T640 (in a
routing matrix based on a TX Matrix router) master Routing Engines or T1600 (in a routing
matrix based on a TX Matrix Plus router) master Routing Engines connected to it. Likewise,
if you issue the same command on the TX Matrix or TX Matrix Plus backup Routing Engine,
the command is broadcast to all the T640 (in a routing matrix based on the TX Matrix
router) backup Routing Engines or T1600 (in a routing matrix based on the TX Matrix
Plus router) backup Routing Engines that are connected to it.
A special type of memory buffer called a cluster is 2 KB in size. For more information, see
The Design and Implementation of the 4.4BSD Operation System by McKusic, Bostic,
Karels, and Quarterman.
view
show system buffers on page 874
show system buffers scc (TX Matrix Router) on page 875
show system buffers sfc (TX Matrix Plus Router) on page 875
show system buffers all-chassis (TX Matrix Plus Router) on page 875
Table 140 on page 874 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 42: Operational Mode Commands for System Monitoring
number
command on a TX Matrix or TX
show system buffers
show system buffers
with .
0
command.
873