Juniper JUNOS OS 10.3 - SOFTWARE Manual page 341

Copyright © 2010, Juniper Networks, Inc.
TX Matrix Plus router, halt all T1600 routers (or line-card chassis) connected to the
TX Matrix Plus router.
—(EX4200 switches only) (Optional) Halt all members of the Virtual Chassis
all-members
configuration.
at time —(Optional) Time at which to stop the software, specified in one of the following
ways:
—Stop the software immediately. This is the default.
now
+minutes —Number of minutes from now to stop the software.
—Absolute time at which to stop the software, specified as year,
yymmddhhmm
month, day, hour, and minute.
hh:mm —Absolute time on the current day at which to stop the software.
—(Optional) Halt both Routing Engines at the same time.
both-routing-engines
lcc number —(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
halt a specific T640 router that is connected to the TX Matrix router. On a TX Matrix
Plus router, halt a specific T1600 router that is connected to the TX Matrix Plus
router. Replace
number
local —(EX4200 switches only) (Optional) Halt the local Virtual Chassis member.
—(Optional) Number of minutes from now to stop the software. This option is
in minutes
an alias for the
at +minutes
media (compact-flash | disk | removable-compact-flash | usb)
for next boot. (The options
routers only.)
—(EX Series switches only) (Optional) Halt the boot media:
media (external | internal)
—Halt the external mass storage device.
external
—Halt the internal flash device.
internal
—(EX4200 switches only) (Optional) Halt the specified member of
member member-id
the Virtual Chassis configuration. Replace
9.
—(Optional) Message to display to all system users before stopping the
message "text"
software.
other-routing-engine —(Optional) Halt the other Routing Engine from which the command
is issued. For example, if you issue the command from the master Routing Engine,
the backup Routing Engine is halted. Similarly, if you issue the command from the
backup Routing Engine, the master Routing Engine is halted.
—(TX Matrix routers only) (Optional) Halt the TX Matrix router (or switch-card chassis).
scc
Chapter 17: Operational Mode Commands for System Setup
with a value from through
0
option.
removable-compact-flash
member-id
.
3
—(Optional) Boot medium
and pertain to J Series
usb
with a value from 0 through
245