Show System Alarms - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show system alarms

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
show system alarms show system alarms
Copyright © 2010, Juniper Networks, Inc.
show system alarms
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display active system alarms.
This command has no options.
System alarms are preset. They include a
rescue configuration alarm is set and a
feature is configured and no valid license is configured for the feature. For more
information about system alarms, see the Junos System Basics Configuration Guide.
admin
show system alarms on page 865
user@host> show system alarms
2 alarms currently active
Alarm time
2005-02-24 17:29:34 UTC
license
2005-02-24 17:29:34 UTC
Chapter 42: Operational Mode Commands for System Monitoring
configuration alarm that appears when no
alarm that appears when a software
license
Class Description
Minor IPsec VPN tunneling usage requires a
Minor Rescue configuration is not sent
865