Juniper JUNOS OS 10.3 - SOFTWARE Manual page 286

Complete Software Guide for Junos
190
®
OS for EX Series Ethernet Switches, Release 10.3
To connect and configure the switch using the J-Web interface:
Transition the switch into initial setup mode:
1.
EX2200 switch—Press the mode button located on the lower right corner of the
front panel for 10 seconds.
EX3200, EX4200, EX4500, or EX8200 switch—Use the
located to the right of the LCD panel (see Figure 6 on page 190):
Figure 6: LCD Panel in an EX3200, EX4200, EX4500, or EX8200 Switch
Press the button until you see
Menu
1.
button.
Press until you see
2. Menu
If EZSetup does not appear as an option in the menu, select Factory Default to
return the switch to the factory default configuration. EZSetup is displayed in
the menu only when the switch is set to the factory default configuration.
Press Enter to confirm setup and continue with EZSetup.
3.
Connect the Ethernet cable from the Ethernet port on the PC to the switch.
2.
EX2200, EX3200, or EX4200 switch—Connect the cable to port 0 (
the front panel of the switch.
EX4500 switch—Connect the cable to the port labeled
of the switch.
EX8200 switch—Connect the cable to the port labeled
and Routing Engine (SRE) module in slot SRE0 in an EX8208 switch or on the
Routing Engine (RE) module in slot RE0 in an EX8216 switch.
These ports are configured as the DHCP server with the default IP address,
The switch can assign an IP address to the management PC in the IP address range
through
192.168.1.2 192.168.1.253
From the PC, open a Web browser, type http://192.168.1.1 in the address field, and
3.
press Enter.
On the J-Web login page, type root as the username, leave the password field blank,
4.
and click Login.
On the Introduction page, click Next.
5.
On the Basic Settings page, modify the hostname, the root password, and date and
6.
time settings:
MAINTENANCE MENU
. Then press
ENTER EZSetup
.
Copyright © 2010, Juniper Networks, Inc.
Menu and Enter buttons
. Then press the
Enter
.
Enter
ge-0/0/0 ) on
on the front panel
MGMT
MGMT on the Switch Fabric
192.168.1.1
.