Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1065

Meaning
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
3 (FPC 3) Prsnt jkl012
The
show virtual-chassis status
as a Virtual Chassis configuration with the member IDs that have been assigned by the
master, the mastership priority values, and the roles. It also displays the neighbor members
with which each member is interconnected.
Verifying that the Dedicated VCPs and Uplink VCPs Are Operational
Verify that the dedicated VCPs interconnecting member switches in wiring closet A and
the uplink VCPs interconnecting the member switches between wiring closets are
operational.
Display the Virtual Chassis interfaces:
user@SWA-0> show virtual-chassis status all-members
fpc0:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Auto-Configured
fpc1:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Auto-Configured
fpc2:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Auto-Configured
fpc3:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
Chapter 44: Virtual Chassis—Configuration Examples
ex4200-24t 128 Linecard
command lists the member switches interconnected
Trunk Status Speed
ID (mbps)
1 Up 32000
2 Up 32000
—1 Up 1000
Trunk Status Speed
ID (mbps)
1 Up 32000
2 Up 32000
—1 Up 1000
Trunk Status Speed
ID (mbps)
1 Up 32000
2 Up 32000
—1 Up 1000
Trunk Status Speed
ID (mbps)
1 Up 32000
3 vcp-1
0 vcp-255/1/0
2 vcp-0
2 vcp-1
3 vcp–255/1/0
Neighbor
ID Interface
1 vcp-0
2 vcp-255/1/0
Neighbor
ID Interface
0 vcp-0
0 vcp-1
3 vcp-255/1/0
Neighbor
ID Interface
3 vcp-0
0 vcp-255/1/0
Neighbor
ID Interface
2 vcp-0
969