Juniper JUNOS OS 10.3 - SOFTWARE Manual page 364

Complete Software Guide for Junos
268
®
OS for EX Series Ethernet Switches, Release 10.3
—(Optional) Restart the kernel replication process, which replicates
kernel-replication
the state of the backup Routing Engine when graceful Routing Engine switchover is
configured.
l2-learning —(Optional) Restart the Layer 2 address flooding and learning process.
—(Optional) (M10, M10i, and M7i routers only) Restart the Layer 2 Tunneling
l2tp-service
Protocol (L2TP) process, which establishes L2TP tunnels and Point-to-Point Protocol
(PPP) sessions through L2TP tunnels.
lacp —(Optional) Restart the Link Aggregation Control Protocol process.
—(TX Matrix and TX Matrix Plus routers only) (Optional) For a TX Matrix router,
lcc number
restart the software process for a specific T640 router that is connected to the TX
Matrix router. For a TX Matrix Plus router, restart the software process for a specific
T1600 router that is connected to the TX Matrix Plus router. Replace
value from through
0
license-service —(EX Series switch only) (Optional) Restart the feature license
management process.
— (TX Matrix and TX Matrix Plus routers and EX Series switches only)
link-management
(Optional) Restart the Link Management Protocol (LMP) process, which establishes
and maintains LMP control channels.
lldpd-service —(EX Series switch only) (Optional) Restart the Link Layer Discovery Protocol
process.
—(Optional) Restart the Management Information Base (MIB) II process,
mib-process
which provides the router's MIB II agent.
—(EX Series switch only) (Optional) Restart the service for NFS mounts
mountd-service
requests.
multicast-snooping —(EX Series switch only) (Optional) Restart the multicast snooping
process.
—(J Series router only) (Optional) Restart the network access
network-access-service
process, which provides the router's Challenge Handshake Authentication Protocol
(CHAP) authentication service.
pgcp-service —(Optional) Restart the pgcpd service process running on the Routing Engine.
This option does not restart pgcpd processes running on mobile station PICs. To
restart pgcpd processes running on mobile station PICs, use the
gateway option.
—(Optional) Restart the process that implements the Pragmatic General Multicast
pgm
(PGM) protocol for assisting in the reliable delivery of multicast packets.
pic-services-logging —(Optional) Restart the logging process for some PICs. With this
process, also known as fsad (the file system access daemon), PICs send special
logging information to the Routing Engine for archiving on the hard disk.
.
3
number
services pgcp
Copyright © 2010, Juniper Networks, Inc.
with a