Juniper JUNOS OS 10.3 - SOFTWARE Manual page 529

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
the TFTP server. Copy the necessary
server.
Create a default configuration file named
server. This file contains IP-address-to-hostname mapping entries. If the DHCP
server does not send a
to resolve its hostname based on its IP address.
network.conf
Alternatively, you can add the IP-address-to-hostname mapping entry for the new
switch to a DNS database file.
The switch uses the hostname to request a
To configure autoinstallation:
Specify the URL address of one or more servers from which to obtain configuration
1.
files.
[edit system]
user@switch# set autoinstallation configuration-servers
NOTE: You can also use an FTP address, for example,
ftp://user:password@sftpconfig.sp.com
Configure one or more Ethernet interfaces to perform autoinstallation and one or two
2.
procurement protocols for each interface. The switch uses the protocols to send a
request for an IP address for the interface:
[edit system]
user@switch# set autoinstallation interfaces ge-0/0/0 bootp
Verifying Autoinstallation Status on an EX Series Switch on page 435
Understanding Autoinstallation of Configuration Files on EX Series Switches on page 399
DHCP Services for EX Series Switches Overview on page 547
Chapter 24: Managing Junos OS Configuration
hostname.conf
network.conf
filename to a new switch, the switch uses
hostname.conf
hostname.conf
.
configuration files to the TFTP
, and copy it to the TFTP
file from the TFTP server.
tftp://tftpconfig.sp.com
433