Health Status Panel; Table 112: Health Status - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Table 111: System Information (continued)
Field
Device model
Inventory details
Junos image
Boot image
Device uptime
Last configured time

Health Status Panel

Table 112: Health Status

Field
EX2200, EX3200, and EX4200 Switches
Memory util.
Flash
Temp.
CPU load
Fan status
EX4500 Switches
Memory util.
Flash
Copyright © 2010, Juniper Networks, Inc.
Description
Indicates the model of the EX Series switch.
NOTE: For an EX8208 switch or an EX8216 switch, the
respect to the selected line card, the Switch Fabric and Routing Engine (SRE) module in an EX8208
switch, or the Routing Engine (RE) module in an EX8216 switch.
Indicates the following:
For EX2200 switches, for EX3200 switches, for EX4200 switches not configured as Virtual
Chassis, and for EX4500 switches, the value in
for a slot in a large Juniper Networks chassis; here, it simply refers to the single switch.
For an EX4200 switch configured as a Virtual Chassis, the value in
FPC, with the number corresponding to the number of member switches.
For an EX8208 switch, the values in
board (CB) refers to SRE and SF modules. FPC refers to line cards.
For an EX8216 switch, the values in
board (CB) refers to RE modules. FPC refers to line cards.
Indicates the version of the Junos OS image.
Indicates the version of the boot image that is used.
Indicates the time since the last reboot.
Indicates the time when the switch was last configured.
Description
Indicates the memory used in the Routing Engine. In a Virtual Chassis configuration, the
memory utilization value of the master Routing Engine is displayed.
Indicates the usage and capacity of internal flash memory and any external USB flash drive.
Indicates the chassis temperature status. Temperatures in the dashboard are listed in Celsius
and the corresponding Fahrenheit values.
Indicates the average CPU usage over 15 minutes.
Indicates the fan status of the switch. The possible values are
Indicates the memory used in the Routing Engine.
Indicates the usage and capacity of internal flash memory and any external USB flash drive.
Chapter 39: System Monitoring Overview
Device model
Inventory is always 1 FPC. FPC is a legacy term
are displayed as 1–3 CB and 0–8 FPC. Control
Inventory
are displayed as 1-2 CB and 0-16 FPC. Control
Inventory
information changes with
is displayed as 1–10
Inventory
, , and .
OK Failed Absent
639