Request System Logout - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

request system logout

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
request system logout request system logout
248
®
OS for EX Series Ethernet Switches, Release 10.3
request system logout (pid pid | terminal terminal | user username)
<all>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Log out users from the router or switch and the configuration database. If a user held the
configure exclusive lock, this command clears the exclusive lock.
—(Optional) Log out all sessions owned by a particular PID, terminal session, or user.
all
(On a TX Matrix or TX Matrix Plus router, this command is broadcast to all chassis.)
pid pid —Log out the user session using the specified management process identifier (PID).
The PID type must be management process.
—Log out the user for the specified terminal session.
terminal terminal
user username —Log out the specified user.
For information about using the
Basics Configuration Guide.
configure
request system logout on page 248
When you enter this command, you are provided feedback on the status of your request.
user@host> request system logout user tammy all
Connection closed by foreign host.
command, see the Junos System
configure exclusive
Copyright © 2010, Juniper Networks, Inc.