Juniper JUNOS OS 10.3 - SOFTWARE Manual page 368

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
set chassis display set chassis display
message (Creating) message (Creating)
set chassis display
message (Deleting)
272
®
OS for EX Series Ethernet Switches, Release 10.3
—(TX Matrix Plus routers only) Display the text message on the craft interface
sfc number
display of the TX Matrix Plus router (or switch-fabric chassis).
clear
Configuring the LCD Panel on EX Series Switches (CLI Procedure) on page 192
clear chassis display message on page 230
show chassis craft-interface
set chassis display message (Creating) on page 272
set chassis display message (Deleting) on page 272
See show chassis craft-interface for an explanation of output fields.
The following example shows how to set the display message and verify the result:
user@host> set chassis display message "NOC contact Dusty (888) 555-1234"
message sent
user@host> show chassis craft-interface
Red alarm: LED off, relay off
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3 4
-------------------------------
Green .. *.. * *.
Red ........
LCD screen:
+--------------------+
|NOC contact Dusty
|(888) 555-1234
+--------------------+
The following example shows how to delete the display message and verify that the
message is removed:
user@host> set chassis display message ""
message sent
user@host> show chassis craft-interface
Red alarm: LED off, relay off
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3 4
-------------------------------
Green .. *.. * *.
Red ........
LCD screen:
+--------------------+
|host
|Up: 0+17:05:47
|
5 6 7
|
|
5 6 7
|
|
|
Copyright © 2010, Juniper Networks, Inc.