Show System Switchover - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show system switchover

Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
312
®
OS for EX Series Ethernet Switches, Release 10.3
show system switchover
show system switchover
<all-chassis | all-lcc | lcc number | scc>
show system switchover
<all-chassis | all-lcc | lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Display whether graceful Routing Engine switchover is configured, the state of the kernel
replication (ready or synchronizing), any replication errors, and whether the primary and
standby Routing Engines are using compatible versions of the kernel database.
NOTE: Issue the
Routing Engine. This command is not supported on the master Routing Engine.
because the kernel-replication
Routing Engine. This process runs only on the backup Routing Engine.
Beginning Junos OS Release 9.6, the
been deprecated on the master Routing Engine on all routers other than a
TX Matrix (switch-card chassis) or a TX Matrix Plus (switch-fabric chassis)
router.
However, in a routing matrix, if you issue the
command on the master Routing Engine of the TX Matrix router (or
switch-card chassis), the CLI displays graceful switchover information for
the master Routing Engine of the T640 routers (or line-card chassis) in the
routing matrix. Likewise, if you issue the
on the master Routing Engine of a TX Matrix Plus router (or switch-fabric
chassis), the CLI displays output for the master Routing Engine of T1600
routers (or line-card chassis) in the routing matrix.
all-chassis —(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display graceful Routing Engine switchover information for all Routing Engines on
the TX Matrix router and the T640 routers configured in the routing matrix. On a TX
Matrix Plus router, display graceful Routing Engine switchover information for all
Routing Engines on the TX Matrix Plus router and the T1600 routers configured in
the routing matrix.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
all-lcc
display graceful Routing Engine switchover information for all T640 routers (or
line-card chassis) connected to the TX Matrix router. On a TX Matrix Plus router,
command only on the backup
show system switchover
process daemon does not run on the master
show system switchover
show system switchover
command has
show system switchover
command
Copyright © 2010, Juniper Networks, Inc.