Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1035

Copyright © 2010, Juniper Networks, Inc.
NOTE: In order to use SFP or XFP uplink module ports as VCPs, you must
configure them to be VCPs using the
Once configured, they will be converted into VCPs. For example
become
vcp-255/1/0
Figure 13: Normal Traffic Flow in a Ring Topology Using SFP Uplink Module
VCPs
Figure 14 on page 940 shows traffic redirected by fast failover.
Chapter 43: Virtual Chassis—Overview, Components, and Configurations
request virtual-chassis vc-port
after you configure it to be a VCP.
command.
xe-0/1/0 will
939