Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1082

Complete Software Guide for Junos
Table 149: Components of a Preprovisioned Virtual Chassis Interconnected Across Multiple
Wiring Closets (continued)
Switch Serial number
SWA-6 stu901
SWA-7 vwx234
SWA-8 yza567
SWA-9 bcd890
986
®
OS for EX Series Ethernet Switches, Release 10.3
Member ID Role
6 linecard
7 linecard
8 linecard
9 linecard
Figure 21 on page 987 shows the different types of interconnections used for this Virtual
Chassis configuration. The rear view shows that the member switches within each wiring
closet are interconnected to each other using the dedicated VCPs. The front view shows
that the uplink module ports that have been set as VCPs and interconnected across the
wiring closets. The uplink module ports that are not set as VCPs can be configured as
trunk ports to connect to a distribution switch.
NOTE: The interconnections shown in Figure 21 on page 987 are the same as
they would be for a configuration that was not preprovisioned across wiring
closets.
Uplink Module
Ports Hardware
EX4200-24T
xe-7/1/0 EX4200-24T
and XFP uplink
module
EX4200-24T
EX4200-48P
Copyright © 2010, Juniper Networks, Inc.
Location
Wiring closet B
Wiring closet B
Wiring closet B
Wiring closet B