Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1076

Complete Software Guide for Junos
Verification
Purpose
Action
Meaning
Purpose
Action
980
®
OS for EX Series Ethernet Switches, Release 10.3
[edit interfaces]
user@Host-D# show
ae0 {
aggregated-ether-options {
lacp {
passive;
periodic fast;
}
}
}
ae1 {
aggregated-ether-options {
lacp {
passive
periodic fast;
}
}
}
To verify that LACP packets are being exchanged, perform these tasks:
Verifying the LACP Settings on page 980
Verifying That the LACP Packets Are Being Exchanged on page 980
Verifying the LACP Settings
Verify that LACP has been set up correctly.
Use the
show lacp interfaces interface-name
enabled as active on one end.
user@Host-A> show lacp interfaces xe-0/1/0
Aggregated interface: ae0
LACP state: Role
xe-0/1/0 Actor
xe-0/1/0 Partner
LACP protocol: Receive State
xe-0/1/0
The output indicates that LACP has been set up correctly and is active at one end.
Verifying That the LACP Packets Are Being Exchanged
Verify that LACP packets are being exchanged.
Use the
show interfaces aex statistics
command to check that LACP has been
Exp Def Dist Col
No Yes No No
No Yes No No
Transmit State
Defaulted Fast periodic
command to display LACP information.
Syn Aggr Timeout Activity
No Yes Fast Active
No Yes Fast Passive
Mux State
Detached
Copyright © 2010, Juniper Networks, Inc.