Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1126

Complete Software Guide for Junos
Disabling Fast Failover in a Virtual Chassis Configuration
Related
Documentation
1030
®
OS for EX Series Ethernet Switches, Release 10.3
While fast failover is enabled by default on dedicated Virtual Chassis ports (VCPs), you
can manually disable fast failover on dedicated VCPs using the
command.
fast-failover vcp disable
To disable the fast failover feature on all dedicated VCPs in a ring:
[edit]
user@switch# set virtual-chassis fast-failover vcp disable
To disable the fast failover feature on all XFP uplink module VCPs in a ring:
[edit]
user@switch# delete virtual-chassis fast-failover xe
To disable the fast failover feature on all SFP uplink module VCPs in a ring:
[edit]
user@switch# delete virtual-chassis fast-failover ge
Example: Configuring Fast Failover on Uplink Module VCPs to Reroute Traffic When a
Virtual Chassis Member Switch or Intermember Link Fails on page 993
Configuring Fast Failover in a Virtual Chassis Configuration on page 1029
Setting an Uplink Module Port as a Virtual Chassis Port (CLI Procedure) on page 1023
Configuring a Virtual Chassis (CLI Procedure) on page 1011
Configuring a Virtual Chassis (J-Web Procedure) on page 1015
Understanding Fast Failover in a Virtual Chassis Configuration on page 936
set virtual-chassis
Copyright © 2010, Juniper Networks, Inc.