Request Chassis Pic - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

request chassis pic

Syntax
Syntax (TX Matrix and
TX Matrix Plus Router)
Release Information
Description
Options
238
®
OS for EX Series Ethernet Switches, Release 10.3
request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number
request chassis pic (offline | online) fpc-slot slot-number pic-slot slot-number
<lcc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Control the operation of the PIC.
NOTE: The request chassis pic (offline | online) fpc-slot slot number pic-slot
command is not supported for built-in PICs on MX Series routers.
slot-number
To view a list of built-in PICs on the router or switch chassis, use the
chassis hardware
offline —Take the PIC offline.
—Bring the PIC online.
online
fpc-slot slot-number —Flexible PIC Concentrator (FPC) slot number. Replace
with a value appropriate for your router or switch:
EX Series switches:
EX3200 switches and EX4200 standalone switches—0.
EX4200 switches in a Virtual Chassis configuration—0 through 9 (switch's
member ID).
EX8208 switches—0 through 7 (line card).
EX8216 switches—0 through 15 (line card).
M5, M7i, M10, and M10i routers—0 or 1.
M20 routers—0 through 3.
M120 routers—0 through 5.
MX960 routers—0 through 11.
M40, M40e, M160, M320, T320, T640, and T1600 routers—0 through 7.
TX Matrix and TX Matrix Plus routers only—On a TX Matrix router, if you specify
the number of the T640 router by using the
method), replace slot-number
with a value from 0 through 31.
slot-number
command.
lcc number
with a value from 0 through 7. Otherwise, replace
Copyright © 2010, Juniper Networks, Inc.
show
slot-number
option (the recommended