Access Switch - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Table 163: Components of the Topology for Connecting Virtual Chassis Access Switches to a
Virtual Chassis Distribution Switch
Hostname and
Switch VCID
SWA-0 Host-A Access
switch
VCID 1
Copyright © 2010, Juniper Networks, Inc.
NOTE: If the remote end of the LAG link is a security device, LACP might not
be supported because security devices require a deterministic configuration.
In this case, do not configure LACP. All links in the LAG are permanently
operational unless the switch detects a link failure within the Ethernet physical
layer or data link layers.
Figure 26: Topology for LAGs Connecting a Virtual Chassis Access Switch
to a Virtual Chassis Distribution Switch
Table 148 on page 973 details the topology used in this configuration example.
Base Hardware
EX4200-48P
switch
Chapter 51: Examples: Interfaces Configuration
Uplink Module Member ID
One XFP uplink 0
module
Trunk Port
to SWD-0
xe-0/1/0
to SWD-1
xe-0/1/1
1117