Table 118: Chassis Viewer For Ex8216 Switches - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

Table 118: Chassis Viewer for EX8216 Switches

Field Description
Front View
Interface status In the image, click any line card or RE module to view the front view of the selected component. The
colors listed below denote the interface status:
Hover the mouse pointer over the interface (port) to view more information.
You can view status for the following ports on the RE module:
NOTE: We recommend you use USB flash drives purchased from Juniper Networks for your EX
Series switch.
Slot numbers Slots on the switch are labeled, from the top of the switch down:
Temperature The active slots contain a gray temperature icon. Hover the mouse pointer over the icon to display
temperature information for the slot.
Fan status Hover the mouse pointer over the fan tray icon to display consolidated fan information.
Power supplies Hover the mouse pointer over the power supply icons to display Name, Status, and Description
information.
LCD panel LCD panel configured for the LEDs on the ports. Hover the mouse pointer over the icon to view the
current character display.
Rear View
SF modules Hover the mouse pointer over the SF module icons in their respective slots to display information.
Slots are numbered SF7–SF0, from left to right.
Related
Documentation
646
®
OS for EX Series Ethernet Switches, Release 10.3
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
USB port—Indicates the USB port for the switch.
Auxiliary port—This port is not enabled on the switch. It is reserved for future use.
Management ( ) port—The management port is used to connect the switch to a management
me0
device for out-of-band management.
Console port—The console port is used to connect the switch to a management console or to a
console server. (You might do this for initial switch configuration.)
RE0 (RE module)
RE1 (RE module)
0–15 (line cards)
J-Web User Interface for EX Series Switches Overview on page 145
Checking Active Alarms with the J-Web Interface on page 652
EX2200 Switches Hardware Overview on page 25
EX3200 and EX4200 Switches Hardware Overview on page 26
Copyright © 2010, Juniper Networks, Inc.