Juniper JUNOS OS 10.3 - SOFTWARE Manual page 923

show chassis location
Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show chassis location
show chassis location
<fpc | interface (by-name name | by-slot fpc number lcc number) | lcc number | scc>
show chassis location
<fpc | interface (by-name name | by-slot fpc number lcc number) | lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Display the physical location of the chassis. This command can only be used on the
master Routing Engine.
none —Display all information about the physical location of the chassis. On a TX Matrix
router, display all information about the physical location of the TX Matrix router
and its attached T640 routers. On a TX Matrix Plus router, display all information
about the physical location of the TX Matrix Plus router and its attached T1600
routers.
—(TX Matrix and TX Matrix Plus routers only) (Optional) Display the physical location
fpc
of all Flexible PIC Concentrators (FPCs).
—(TX Matrix and TX Matrix Plus routers only) (Optional) Display
interface by-name name
the physical location of a specified interface name. On a TX Matrix router, this option
displays the FPC number and T640 router (or line-card chassis) number associated
with the specified interface. On a TX Matrix Plus router, this option displays the FPC
number and T1600 router (or line-card chassis) number associated with the specified
interface.
interface by-slot fpc number lcc number
(Optional) On a TX Matrix router, display the global FPC number of an interface by
specifying its local FPC number and T640 router (or line-card chassis) number. On
a TX Matrix Plus router, display the global FPC number of an interface by specifying
its local FPC number and T1600 router (or line-card chassis) number.
The global FPC number is the FPC slot number when all the FPC slots in the routing
matrix are considered:
on a particular T640 router.
For , replace
fpc number
For , replace
lcc number
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
display the physical location of a specified T640 router (or line-card chassis) that
is connected to a TX Matrix router. On a TX Matrix Plus router , display the physical
Chapter 42: Operational Mode Commands for System Monitoring
—(TX Matrix and TX Matrix Plus router only)
through . The local FPC number is the FPC slot number
0 31
with a value from through
0
with a value from through
0
.
7
.
3
827